ioSafe N2 NAS
ioSafe’s N2 NAS will weather any disaster you can throw at it
- Sturdy, heavy, incredibly well built
- Based on Synology’s excellent hardware and software
- Paint finish isn’t the best (but who cares?)
- Only mid-range Synology NAS hardware
If you’re looking for a network-attached storage device to back up your home or business’s important data, it makes sense to pick as robust a backup as possible. It’s hard to get much more robust than the fireproof, waterproof, disaster-proof ioSafe N2, based on Synology’s reliable DS213.
Price$ 999.00 (AUD)
If you’re running a business, or if you’ve got a couple of computers on your home network, it makes sense that you should keep a backup of your data. There are a few ways you can do this, but storing it all on a NAS is one of the simplest.
If you’re storing your backups locally, though, the issue arises of you losing both your data and your backup in the case of a disaster — whether it’s a house or business fire, a flood, or other unforeseen circumstance. ioSafe’s N2 neatly side-steps that issue by being simply too sturdy to be affected.
ioSafe N2: Design and features
The ioSafe N2 is based on Synology’s DS213. Synology is a company with an illustrious history in NAS devices, and its DiskStations are regarded as some of the best for home and small business use.
ioSafe, on the other hand, is a company with an illustrious history in everything-proof technology. We’ve looked at the Rugged Portable and SoloPro in the past, and found both to be more than able to withstand the harshest punishments we could imagine up. After running over the Rugged Portable with a car, and leaving it out in the rain for a day, and dropping it more times than we can count, we still use it every day for transferring and storing a library of video files.
Put the two together, and you’ve got the ioSafe N2. The N2 we received for testing from Rockingham IT Solutions was pre-packed with two 2TB Seagate hard drives, although you can buy the disk-less version and add hard drives as you desire from a pre-approved list.
The ioSafe N2 is a hulking beast of a device, even compared to other less-than-elegant NASes like the Synology DS412+. Viewed front on, the N2 has a single large, flat, black-painted face secured by two hex bolts, with the ioSafe logo on the lower left corner. Below this removable face are a small array of buttons and ports — power, a direct-copy button, USB 2.0 and SD card slots, and some status lights for those inputs and the N2’s internal disks.
We should mention that on our review drive, the N2’s matte black paint finish wasn’t perfect — there were a few bubbles on the front face and side, and some peeling around the top hex bolt. This didn’t bother us in the slightest — it’s a NAS, not a sportscar — but it’s worth mentioning.
With two internal 3.5-inch hard drive bays accessible through its front panel, the N2 is made to be used with SATA II hard drives, although 2.5-inch drives (including SSDs) can be used with adapters. A maximum drive size of 4TB per disk applies, so you can have a maximum array size of 8TB if you’re using a RAID 0 setup, writing to both disks in parallel and prioritising speed over reliability and redundancy.
We find it interesting that the N2 is only based on the garden-variety DS213, rather than the up-scale DS213+, which is a little more powerful and versatile and has a low-power slumber mode. The two are quite similar in terms of features, though, so it’s not a big loss, especially if you’ll be using it regularly rather than letting it coast along in sleep mode.
Around the back of the NAS, the ioSafe N2 is quite simple. There’s a power socket for the DC power brick, two USB 3.0 inputs, and a single Gigabit Ethernet connector. Compared to the DS213+, the only thing that’s missing is an eSATA port — not a huge loss. As well as connecting external storage to the USB 3.0 ports, you can also hook up a range of Wi-Fi adapters to connect to a wireless network if you’ve got one.
ioSafe N2: Disaster-proofing and setup
The N2 is very sturdy. If you lose all your other computing equipment in a fire, the N2 should survive — it’s rated to last for half an hour at a fire of 1550 degrees Fahrenheit (about 850 degrees Celsius). House fires can apparently get hotter than this in worst-case scenarios, but it’s far, far better than nothing.
If you manage to find yourself in the middle of a flood, the N2, again, should survive. You can fully submerse it in either salt or fresh water, in up to 10 feet of water, for up to 72 hours. The N2 has a Kensington lock port that can be used to secure it against theft, and an optional floor-mount-and-padlock kit for a further layer of security. One area where the N2 doesn’t have any ruggedised credentials is in shock-proofing — being such a heavy and solidly-constructed piece of technology, you can’t drop it and expect it to survive unscathed, but this is a fanciful scenario considering that at 12.7kg it’s not exactly portable.
Being based on a Synology DS213 NAS, the ioSafe N2 runs an unmodified version of Synology’s DiskStation Manager operating system software. We loaded the latest DSM 4.2 version onto the N2 for our testing, although an updated and more feature-packed DSM 4.3 version should be launching soon. The setup procedure is simple, and instructions are included in the box.
Also included in the box is a hex key for removing the N2’s front panel and internal drive bays, magnets to attach the key to the NAS for safekeeping, a Gigabit Ethernet cable, a power cable and DC power brick, and DSM installation disc.
The ioSafe N2 performed well in our NAS tests, where we connected it to a Gigabit-capable Ethernet router and the Gigabit Ethernet port of a PC running Windows 8 and a high-speed solid-state drive to remove any bottle-necks. The N2 was set up with two 2TB drives in the Synology Hybrid RAID array mode. When we transferred 248GB of video files from the NAS to the PC, we recorded an average read rate of 101MB/sec, and transferring back we recored an average write rate of 63MB/sec — in line with Synology’s claims, and more than fast enough for anything but the most strenuous use cases.
For more information on the ioSafe N2’s operating system, we recommend you read our reviews of the Synology DS212j and Synology DS412+. Since the ioSafe N2 is based on Synology hardware, your experience will be almost identical.
ioSafe N2: Conclusion
The extra price of the ioSafe N2 over a comparable NAS — including the Synology DS213, with which it shares its internal components and software — comes from its disaster-proofing design.
Given that when you’re backing up data, you want those backups to last, we think paying extra is worth it. Setting up the N2 is a similar experience to any other NAS, and it has a similar feature-set and limitations, so it stands alone on the quality of its construction.
Join the newsletter!
Most Popular Reviews
- 1 Panasonic Ultra HD OLED TV Review
- 2 Oppo A77 smartphone: Full in-depth review
- 3 Huawei GR5 phone: Full, in-depth review
- 4 Ring Video Doorbell review
- 5 Sony Bravia 2017 TVs: Full, in-depth review
Latest News Articles
- AMD Radeon Pro Graphics powers Amazon Web Services AppStream 2.0
- Western Digital to acquire Tegile
- ASUSTOR Announces Official Launch of ADM 3.0
- Seagate Launces DJI Fly Drive in Australia and New Zealand for Drone Users
- New development for Western Digital
PCW Evaluation Team
The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.
The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.
The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic
I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.
It’s perfect for mobile workers. Just take it out — it’s small enough to sit anywhere — turn it on, load a sheet of paper, and start printing.
The HP OfficeJet 250 Mobile Printer is a great device that fits perfectly into my fast paced and mobile lifestyle. My first impression of the printer itself was how incredibly compact and sleek the device was.
- Dishonored - Death Of The Outsider review:
- LG G6 Plus: Full, in-depth review
- MSI GE73 VR Raider Gaming Laptop review
- Which flagship TV is best? Sony 4K HDR Bravia 2016 versus LG 4K HDR OLED 2016
- 10 Blu-ray movies / Best looking Blu-ray movies
- FTSocial Media Executive / Specialist (Facebook) - Online PokerNSW
- FTWeb Developer - Full Stack - 3D, VR, WebGLNSW
- CCInformation Security ConsultantQLD
- FTSQL BI Developer - SSRS, Power BIOther
- FTDigital Business AnalystACT
- FTJunior-Mid level .Net/Front-End Developer (Brisbane location)VIC
- CCDatabase Administrator - BrisbaneVIC
- CC.Net Developers - Multiple positionsACT
- CCProject ManagerQLD
- CCNon-Functional Test ConsultantNSW
- CCIOS DeveloperNSW
- FTJunior .Net DeveloperOther
- FTJunior-Mid level Technical Software Support/Project CoordinatorQLD
- FTBusiness QA Manager - TelecommunicationsOther
- TP.NET DeveloperNSW
- TPProject Support OfficerNSW
- TPProject Officer. 6 month contract. Program AdministrationNSW
- CCProgrammer Analyst - BrisbaneVIC
- FTCRM Siebel DeveloperVIC
- TPSAP ABAP DeveloperQLD
- CCSenior Project OfficerNSW
- CCMicrosoft Systems EngineerVIC
- FTJunior-Mid level Technical Software Support/Project CoordinatorQLD
- TPBusiness AnalystNSW
- FTSenior Asset Information OfficerOther