Shape-shifting robot reveals secrets of Fukushima reactor

Robots reveal high radioactivity but little debris in important mission

A robot developed by the International Research Institute for Nuclear Decommissioning (IRID) and Hitachi-GE Nuclear Energy rolls on the floor in a demonstration. On Friday, it began probing inside the primary containment vessel of the No. 1 reactor at Japan's crippled Fukushima Dai-ichi nuclear plant, which suffered meltdowns following the 2011 earthquake and tsunami.

A robot developed by the International Research Institute for Nuclear Decommissioning (IRID) and Hitachi-GE Nuclear Energy rolls on the floor in a demonstration. On Friday, it began probing inside the primary containment vessel of the No. 1 reactor at Japan's crippled Fukushima Dai-ichi nuclear plant, which suffered meltdowns following the 2011 earthquake and tsunami.

Two robots that can change their shape on command have provided the most detailed look yet inside the heart of reactor number 1 at the Fukushima Daiichi nuclear power station in Japan.

The reactor is one of three that suffered a core meltdown after the massive tsunami that knocked electrical systems offline at the plant in March 2011, prompting a nuclear emergency that will take decades to clean up.

One of the most difficult jobs for the plant's owner, Tokyo Electric Power Co. (TEPCO), is how to safely decommission the reactors that melted down, which are much too dangerous for humans to enter.

The robots are inspecting the reactor's primary containment vessel (PCV), a large concrete structure that sits around the reactor and most of its associated machinery and piping. Molten nuclear fuel melted through the bottom of the reactor following the tsunami and is thought to have fallen to the floor of the PCV.

The first robot ventured in on April 10 and worked for a time before getting stuck about three quarters of the way through its mission. Three days later, TEPCO severed its cables to avoid them getting tangled with a second robot that went in on April 15.

They both found an environment that remains highly radioactive, though less than expected.

TEPCO says the robots recorded a radiation dose of between 5 and 10 Sieverts per hour -- a tenth of what was expected -- and video released by the company shows levels as high as 25 Sieverts per hour in one area. That's more than a thousand times the radiation an average American receives in a year and enough to cause almost certain death in 10 minutes.

But the robots also revealed little apparent damage and debris inside the PCV -- a contrast to the post-tsunami scene outside the power station of massive destruction. That should make future robotic missions easier.

The robots were made by Hitachi-GE Nuclear Energy and Japan's International Research Institute for Nuclear Decommissioning and can change their shape from one resembling the letter "l" to one resembling the numeral "3." Each is equipped with a thermometer, a tilting video camera, a dosimeter to gauge radiation and a laser scanner to measure distance.

The next step will be to investigate the bottom of the PCV, where the nuclear fuel is thought to be sitting.

Martyn Williams covers mobile telecoms, Silicon Valley and general technology breaking news for The IDG News Service. Follow Martyn on Twitter at @martyn_williams. Martyn's e-mail address is martyn_williams@idg.com

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection

Tags Hitachi-GE Nuclear EnergyroboticsTokyo Electric Power Co.International Research Institute for Nuclear Decommissioning

Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Martyn Williams

IDG News Service
Show Comments

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

David Coyle

Brother PocketJet PJ-773 A4 Portable Thermal Printer

I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.

Kurt Hegetschweiler

Brother PocketJet PJ-773 A4 Portable Thermal Printer

It’s perfect for mobile workers. Just take it out — it’s small enough to sit anywhere — turn it on, load a sheet of paper, and start printing.

Featured Content

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?