Which accessories work with the new iPad?

Will all accessories fit the new iPad?

If you're in the market for a new iPad, there's a good chance you'll want a protective case or some other new accessories. But whether this is your first iPad, or you're upgrading from an older model, you're probably wondering whether existing accessories—those originally designed for the iPad 2—work with the new model. Perhaps you're planning to purchase some gear in a local store or online, or maybe you've already got a few add-ons you'd like to reuse.

We spent much of Friday testing the new iPad with accessories originally made for the iPad 2, and for the most part, the news is good—the new model works with many existing iPad add-ons. But not all. Here's the scoop.


As we discussed last week, the new iPad is exactly the same height and width as the iPad 2, but ever so slightly—0.03 inches, to be exact—thicker. The lens for the new iPad's improved camera is also a fraction of an inch bigger. But the second- and third-generation iPads are otherwise physically identical—all the buttons, switches, jacks, and ports are even in the same locations. The two models are also electrically and mechanically identical insofar as accessories are concerned.

This means that for many type of accessories, existing offerings should work fine. This includes non-cradle chargers and batteries, and other non-cradle dock-connector accessories; headphones; screen protectors; and anything else that doesn't depend on an exceptionally precise fit with the back of the iPad. If it simply plugs into the iPad, it should work. If it sticks to the iPad's screen, it should work. If the iPad rests loosely in it, it should work.

Shouldn't be a problem

In our testing, even many form-fitting iPad 2 accessories work with the third-generation iPad. For example, most dock-cradle accessories—such as speaker docks, chargers, and even Apple's iPad Keyboard Dock—released prior to the new iPad work fine. (This is likely because many of these accessories were designed to fit both the iPad 2 and the original iPad, and the original iPad is even thicker than the new model.)

Similarly, most iPad stands and mounts—especially those that hold the iPad loosely in a groove, slot, or cradle, or on easel-style supports—work perfectly with the iPad. Even Twelve South's HoverBar, which uses a rigid-plastic, corner-hugging cradle, fits the new iPad, albeit with a tighter fit than when mounting an iPad 2.

Finally, all the bags, packs, and protective sleeves we tested, whether made for the iPad 2 or the original iPad, accomodate the new model without problems.

Be careful out there

Where it starts to get dicey is with form-fitting accessories that were designed to fit the iPad 2 precisely. We've tested dozens of form-fitting iPad 2 cases, keyboard cases, stands, and mounts today, and a few didn't accomodate the new iPad at all, while others worked but didn't fit quite right.

We encountered frequent fit problems with folio-style cases. With many of these products, the case held the new iPad just fine, but the case's openings for accessing the iPad's controls, cameras, and ports didn't line up perfectly. And on a few others, the front cover wouldn't properly activate the iPad's magnetic sleep/wake feature. The reason here is that these cases require you to slide the iPad into the side of a leather, rubber, or fabric frame, and the new iPad's extra thickness often kept it from sliding all the way in. The result is that the iPad didn't quite line up with cutouts for the camera, side switch, buttons, or ports, or the cover didn't close properly. If you've got an ill-fitting folio case, it will likely suffice until you can get one that fits better, but it's not a great option.

Similarly, most the book-binding-style cases we tested, such as those from Portenzo, Dodocase, and Pad & Quill, had fit problems. These cases are made with internal wood or plastic frames that grip the corners of the iPad with precision, and those corner grips just can't get all the way around the new, thicker iPad. If you're interested in this type of case, you'll want to wait for a version made specifically for the new iPad—all three companies, as well as a number of other vendors of this type of case, have announced such models. (One exception here was Xhibt's iPad 2 Flip Case, which fit fine.)

On the other hand, we expected to have problems with shells and skins, which tend to be form-fitting, but many of the ones we tested—especially those made of silicone or other materials that stretch a little—fit the new iPad well. For example, iLuv's Flex-Gel Case fit the iPad 2 like a glove, but it's just flexible enough that it also works with the new iPad, if a bit tighter. For some others, such as Speck's rigid Smart Shell for iPad 2, the case fit, but once it wrapped around all of the new iPad's edges, it was obvious the case was made for something slightly thinner—there were a few gaps between the iPad's body and the case where the case was being stretched a bit too much. In general, the shells that didn't fit tended to be those made of especially rigid material, those that barely extended around the sides of the iPad, and, of course, those that had little to no wiggle room with the iPad 2—these often couldn't firmly attach to the new iPad.

In terms of keyboard cases, our experiences were similar. While looser folio-style keyboard cases for the iPad 2 work with the new model, others don't quite fit. For example, the first of our two favorite keyboard folios, Adonit's Writer, didn't even allow us to insert the third-generation iPad, while the second, Zagg's ZaggFolio for iPad 2, accommodated the new tablet, but tightly enough that it was difficult to remove the iPad.

Surprisingly, we had no problems using the new iPad with a ClamCase laptop-style keyboard case for the iPad 2, although the company seems to be selling a different model specifically for the third-generation iPad. Another of our favorites, Logitech's Fold-Up Keyboard for iPad 2, didn't fare as well, as the new iPad's thicker profile kept it from seating properly in the Fold-Up Keyboard's plastic frame. In general, shell-style iPad 2 keyboards that fit on the front of the iPad should work fine, while those that clip tightly onto the back of the iPad are more likely to have issues. (Standalone keyboards will of course work with the new iPad just fine.)

The overall lesson here is that if you're looking to buy an iPad case or other form-fitting accessory, the safest approach is to get one the manufacturer specifically claims is compatible with the third-generation iPad. If you've spotted an iPad 2 case, keyboard case, or similar accessory you like, and it's at all dependent on a precise fit, you'll want to check that fit yourself before buying, or check the Web for reports from other iPad users—or buy from a vendor with a good return policy.

Macworld staff editor Leah Yamshon contributed to this article.

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection
Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Dan Frakes

Show Comments

Cool Tech

Breitling Superocean Heritage Chronographe 44

Learn more >

SanDisk MicroSDXC™ for Nintendo® Switch™

Learn more >

Toys for Boys

Family Friendly

Panasonic 4K UHD Blu-Ray Player and Full HD Recorder with Netflix - UBT1GL-K

Learn more >

Stocking Stuffer

Razer DeathAdder Expert Ergonomic Gaming Mouse

Learn more >

Christmas Gift Guide

Click for more ›

Most Popular Reviews

Latest Articles


PCW Evaluation Team

Edwina Hargreaves

WD My Cloud Home

I would recommend this device for families and small businesses who want one safe place to store all their important digital content and a way to easily share it with friends, family, business partners, or customers.

Walid Mikhael

Brother QL-820NWB Professional Label Printer

It’s easy to set up, it’s compact and quiet when printing and to top if off, the print quality is excellent. This is hands down the best printer I’ve used for printing labels.

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

Featured Content

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?