Debris prevents robots from entering stricken nuclear plant

A Japanese robot is waiting to enter the Fukushima Daiichi plant, and another is on the way from the US

Tokyo Electric Power is looking to send radiation-hardened robots into the wrecked Fukushima Daiichi nuclear power plant, but obstacles literally stand in the way of their use.

The company has already been provided a nuclear safety robot by Japan's Nuclear Safety Technology Center and the U.S. Dept. of Energy said this week that it would send at least one robot to Japan, but the large amount of debris and cables littering the Fukushima plant poses problems for their use.

The Japanese robot, called "Moni Robo A," remains at the operations staging area because of the state of the plant, said Hiro Hasegawa, a spokesman for Tokyo Electric Power (TEPCO). A tsunami washed a large amount of debris across the plant and more was spread when hydrogen explosions blew the tops off two reactors buildings.

"If the problem is cleared in the future, we will try to use it," he said.

Moni Robo A runs on caterpillar tracks and is 1.5 meters tall. It has radiation and gas sensors, front and rear cameras, a GPS (Global Positioning System) unit, and a 3D camera at the top. There's also a hinged manipulator arm that can reach out around the robot.

It can be remotely operated from a portable control room that was designed to fit inside a C-130 cargo aircraft for rapid deployment. The control center can remain in a safe area and communicate with the robot via radio. Repeater stations can extend the range of the radio link if required.

Robots are also on their way from the U.S., according to testimony provided to the Senate Energy and Natural Resources Committee in Washington, D.C., this week.

"The Department [of Energy] has provided information to the Government of Japan on radiation-hardened robotic capabilities available within [the U.S.], a shipment is being readied," said Peter Lyons, acting assistant energy secretary for nuclear energy.

"We are moving expeditiously to ship not only the robots, but also operators who perhaps will be used to train Japanese operators," he said.

The U.S. is already flying a drone over the Fukushima Daiichi plant to collect data and provide video of the plant. The Global Hawk aircraft, developed by Northrop Grumman, is known for its use above Iraq and Afghanistan, but it is being employed above Fukushima for the same reasons it's used elsewhere: because it's autonomous there is no risk to a pilot.

Some have expressed surprise that robots were not put into use at the plant earlier. Numerous robots have been developed in the country, but most are focused on industrial use in factories or as home-help devices for the elderly.

Martyn Williams covers Japan and general technology breaking news for The IDG News Service. Follow Martyn on Twitter at @martyn_williams. Martyn's e-mail address is martyn_williams@idg.com

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection

Tags roboticsTokyo Electric Power Co.

Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Martyn Williams

IDG News Service
Show Comments

Cool Tech

SanDisk MicroSDXC™ for Nintendo® Switch™

Learn more >

Breitling Superocean Heritage Chronographe 44

Learn more >

Toys for Boys

Family Friendly

Panasonic 4K UHD Blu-Ray Player and Full HD Recorder with Netflix - UBT1GL-K

Learn more >

Stocking Stuffer

Razer DeathAdder Expert Ergonomic Gaming Mouse

Learn more >

Christmas Gift Guide

Click for more ›

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Walid Mikhael

Brother QL-820NWB Professional Label Printer

It’s easy to set up, it’s compact and quiet when printing and to top if off, the print quality is excellent. This is hands down the best printer I’ve used for printing labels.

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

George Khoury

Sharp PN-40TC1 Huddle Board

The biggest perks for me would be that it comes with easy to use and comprehensive programs that make the collaboration process a whole lot more intuitive and organic

David Coyle

Brother PocketJet PJ-773 A4 Portable Thermal Printer

I rate the printer as a 5 out of 5 stars as it has been able to fit seamlessly into my busy and mobile lifestyle.

Featured Content

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?