NASA: Use of robots 'very successful' in Endeavour's mission

Shuttle undocks from the space station this afternoon; slated to land on earth Friday

Dexter, yesterday.

Dexter, yesterday.

Shortly after the NASA space shuttle Endeavour undocked with the International Space Station this afternoon, officials called the mission's robotics work a huge success.

The shuttle and its seven-person crew spent 10 days, 23 hours and 39 minutes linked up with the space station to install the last of the Japanese laboratory there. And for those nearly 11 days at least one, if not two, robots were at work almost every day. Without them, the mission simply could not have been completed, according to Bill Jeffs, a NASA spokesman.

"This was a challenging mission from a robotics standpoint," Jeffs said in an interview with Computerworld today. "We used the robotic arm on the space station, the robotic arm on the space shuttle and the arm on the Japanese laboratory. In terms of robotics, it's been very challenging but very successful."

After the undocking, the Endeavour embarked on a so-called "fly-around" the space station which allows the astronauts still there to visually scan the outside of the shuttle for any problems with the critical heat shield. Once the inspection is completed, NASA pilot Doug Hurley is set to maneuver the shuttle away from the station and put it on a course to earth.

Endeavour is scheduled to land at 10:48 a.m. EDT on Friday at the Kennedy Space Center in Florida.

Before the mission, Holly Ridings, lead space station flight director for Endeavour, called it one of the most technical ever to be undertaken by NASA. With an ambitious schedule of five spacewalks, the astronauts onboard both the station and the shuttle used three robotic arms.

And the arms weren't just working one at a time. At one point, one robot lifted massive equipment and laboratory pieces out of the shuttle's payload bay and handed it off to a second robotic arm. Then the first robotic arm moved slinky-like down the backbone of the space station. Once the first arm was back in place, it re-took the load and maneuvered it into place on the space station.

The arm onboard the space station, dubbed Canadarm II or the big arm, made this "walk" back and forth on the backbone of the station several times over the course of the mission.

While the robotic arms were largely used to install a new piece of the Japanese lab, NASA said they were also used to install cameras on the outside of the space station and to replace six massive batteries that hold energy created by the station's solar arrays.

The next shuttle mission is scheduled to launch on Aug. 18, when the Discovery is expected to deliver 33,000 pounds of supplies and equipment to the space station.

Join the newsletter!

Or

Sign up to gain exclusive access to email subscriptions, event invitations, competitions, giveaways, and much more.

Membership is free, and your security and privacy remain protected. View our privacy policy before signing up.

Error: Please check your email address.
Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.
Sharon Gaudin

Sharon Gaudin

Computerworld (US)
Show Comments

Most Popular Reviews

Latest Articles

Resources

PCW Evaluation Team

Tom Pope

Dynabook Portégé X30L-G

Ultimately this laptop has achieved everything I would hope for in a laptop for work, while fitting that into a form factor and weight that is remarkable.

Tom Sellers

MSI P65

This smart laptop was enjoyable to use and great to work on – creating content was super simple.

Lolita Wang

MSI GT76

It really doesn’t get more “gaming laptop” than this.

Jack Jeffries

MSI GS75

As the Maserati or BMW of laptops, it would fit perfectly in the hands of a professional needing firepower under the hood, sophistication and class on the surface, and gaming prowess (sports mode if you will) in between.

Taylor Carr

MSI PS63

The MSI PS63 is an amazing laptop and I would definitely consider buying one in the future.

Christopher Low

Brother RJ-4230B

This small mobile printer is exactly what I need for invoicing and other jobs such as sending fellow tradesman details or step-by-step instructions that I can easily print off from my phone or the Web.

Featured Content

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?