Avoid the red eye effect

"How do I get rid of red eye in my photos?" is the second most common question I get from readers.

"How do I get rid of red eye in my photos?" is the second most common question I get from readers.(The most common, of course, is "Are you as handsome in real life as you are in your photo?" and the answer, of course, is yes.) This week let's look at five simple ways to minimize red eye when you take the photo.

1. Brighten the Room

Let's start at the beginning. Red eye usually happens in low light, when your subject's eyes naturally dilate to let in as much light as possible. When you fire your camera flash, the light passes through the open pupils and bounces off the back the eye, looking red.

Red eye is mainly a result of the dramatic difference in brightness between ambient lighting and your flash. That's why you'll never see red eye in a photo taken outdoors in bright sunlight. To minimize the possibility of red eye, then, take your picture outdoors, or inside near a window where there's natural lighting. At night, brighten the room by turning on all the lights you can.

2. Use the Red Eye Mode

If you're stuck in a dimly lit room or outdoors at night, then it's time to turn to your camera for help. Your camera's red eye reduction mode (which is usually identified by an eye-shaped icon) fires the flash several times quickly right before the picture is taken, forcing your subject's pupils to close down to a smaller size, thus minimizing reflections.

Of course, your camera's red eye mode can help, but it's no cure. You might still get some red eye even in this mode. And remember that the picture hasn't been taken at the first sign of flash, so hold the camera steady. And it's a good idea to warn your subject to hold still for a few seconds, to be sure the camera is really done taking the photo.

3. Don't Let Light Reflect Directly Into the Camera

The difference in light levels between flash and room light is only part of the problem. Another factor is the angle of the reflected light. Think of light like balls on a pool table: If you can keep light from reflecting directly from the subject's eyes back into the lens, you win.

If your flash is, like most, permanently mounted on the camera, then you don't have a lot of options. One thing you can try: Ask your subject to look away from the camera. Imagine a line that runs from the camera lens to your subject. The greater the angle between your subject's eye line and that lens line, the less red eye you'll see in your photo. Turn that law of physics into an advantage, by staging some artistic portraits in which your subjects aren't looking right at the camera.

4. Move the Flash Off the Camera

You might have a camera with a hot shoe connection for an external flash. This is the Holy Grail of red eye reduction--by moving the flash off the camera, it allows you to get the flash out of that lens line I mentioned in tip #3, so you can effectively eliminate red eye reflections. Mounting a flash on the hot shoe helps. Even better: Use an extension cable to hold the flash off to the side. If you have an external flash unit, you can probably also "bounce" the flash off a wall or ceiling. Reflected light is much more diffuse and will do wonders for your photos.

5. Clean It Up Afterwards

You'll still end up with red eye in some photos. You can't always shoot in great light, and sometimes you'll have to take some pictures with the camera's built-in flash. When that happens, you can use the red eye tool in your favorite photo editor to blot out the red.

Join the newsletter!

Error: Please check your email address.
Rocket to Success - Your 10 Tips for Smarter ERP System Selection

Tags photographytutorial

Keep up with the latest tech news, reviews and previews by subscribing to the Good Gear Guide newsletter.

Dave Johnson

PC World (US online)
Show Comments



Sansai 6-Outlet Power Board + 4-Port USB Charging Station

Learn more >



Back To Business Guide

Click for more ›

Most Popular Reviews

Latest Articles


PCW Evaluation Team

Louise Coady

Brother MFC-L9570CDW Multifunction Printer

The printer was convenient, produced clear and vibrant images and was very easy to use

Edwina Hargreaves

WD My Cloud Home

I would recommend this device for families and small businesses who want one safe place to store all their important digital content and a way to easily share it with friends, family, business partners, or customers.

Walid Mikhael

Brother QL-820NWB Professional Label Printer

It’s easy to set up, it’s compact and quiet when printing and to top if off, the print quality is excellent. This is hands down the best printer I’ve used for printing labels.

Ben Ramsden

Sharp PN-40TC1 Huddle Board

Brainstorming, innovation, problem solving, and negotiation have all become much more productive and valuable if people can easily collaborate in real time with minimal friction.

Sarah Ieroianni

Brother QL-820NWB Professional Label Printer

The print quality also does not disappoint, it’s clear, bold, doesn’t smudge and the text is perfectly sized.

Ratchada Dunn

Sharp PN-40TC1 Huddle Board

The Huddle Board’s built in program; Sharp Touch Viewing software allows us to easily manipulate and edit our documents (jpegs and PDFs) all at the same time on the dashboard.

Featured Content

Latest Jobs

Don’t have an account? Sign up here

Don't have an account? Sign up now

Forgot password?