Notebook memory upgrade: Dell Latitude E6520
James Hopkin has worked in the Australian computer industry since 1987. He founded Upgradeable.com in 1999 as an independent online source for computer memory upgrades. From day one the Upgradeable way has been to help computer users easily upgrade their systems.
The Dell Latitude E6520 has the following specifications:
Memory Type: DDR3 PC3-10666, 1333MHz, 204-PIN, SO-DIMM
Maximum Memory: 8GB
Configuration: 2 Memory Slots
Base Memory (Non-Removable): 0MB
Before you begin the installation, it's worth considering backing up any critical files in the event of a problem occurring. DO NOT install the memory while the computer is in standby or hibernation mode. Ensure that the system is completely powered down.
This is simply done to remove any static electricity from your body so that accidental zaps don't damage your memory modules. While your computer is still plugged into the wall, touch a metal part of your computer. If you leave your computer you will need to ground yourself again. Alternatively, you can invest in an anti-static strap and clip yourself to a grounded piece of metal.
Once the computer is completely shutdown, remove all plugs and the power cable from the computer. As you are upgrading a notebook it is also important to remove the battery.
Always keep the memory modules in their anti-static bag until you are ready to begin the installation. Handle the modules only by the edges and don't touch the gold pins. No tools are required to remove or fit memory modules and using tools can cause damage to the modules.
Removing the Battery
1. Slide the battery lock and then the battery release latch towards the sides of the computer.
2. Rotate the outer edge of the battery upwards and remove it from the computer.
Removing the Base Cover
1. Remove the screws that secure the base cover to the computer.
2. Lift the base cover from the back of the computer and slide it towards the front of the computer.
3. Remove the base cover from the computer.
Installing the Memory
1. Locate the memory slot on the base of the notebook.
2. To replace an existing memory module, spread both clips on either side of the memory slot to release it. To remove the memory module from the slot, hold it by the edges and slide it out at a 45 degree angle.
3. To install the new memory, hold the module at a 45 degree angle and align the notch on the module with the notch located in the memory slot.
4. Gently push the module in then down until the clips on both sides click to lock the module in place.
5. Make sure the module is firmly in the slot and that's it's not moving. Otherwise, reinstall the module by repeating steps 2 to 4.
6. Replace the base cover by reversing the instructions for its removal.
7. Replace the battery and any removed accessories.
You're done! Once you have closed your computer and reattached all the accessories that were connected, it's time to switch it on. No software or settings will need to be changed as the computer detects the memory upgrade automatically.
Find more memory upgrades at: www.upgradeable.com.au.
Most Popular Reviews
- 1 Review: TCL C1 series 4K TV
- 2 Mazda MX-5 (2016) review: Absolute driving purity
- 3 Sony 75-inch UHD TV (X9400C) review: Sony and Android are a winning duo
- 4 LG 55EG960T OLED UHD TV
- 5 Panasonic Viera UHD TV review: good hardware, fragmented software
Join the Good Gear Guide newsletter!
Best Deals on Good Gear Guide
Latest News Articles
- Optus looks to lock in EPL fans with new bundles
- How Intel knocked itself out of the smartphone chip market
- Steam updates user reviews to better reflect trends
- May the Fourth be with you: 4 Star Wars tech tributes you can actually use
- Opera pulls trigger on baked-in ad blocker
GGG Evaluation Team
First impression on unpacking the Q702 test unit was the solid feel and clean, minimalist styling.
For work use, Microsoft Word and Excel programs pre-installed on the device are adequate for preparing short documents.
The Fujitsu LifeBook UH574 allowed for great mobility without being obnoxiously heavy or clunky. Its twelve hours of battery life did not disappoint.
The screen was particularly good. It is bright and visible from most angles, however heat is an issue, particularly around the Windows button on the front, and on the back where the battery housing is located.
My first impression after unboxing the Q702 is that it is a nice looking unit. Styling is somewhat minimalist but very effective. The tablet part, once detached, has a nice weight, and no buttons or switches are located in awkward or intrusive positions.
- CCSolution ArchitectQLD
- CCMid Range Developer (Senior .NET Developer)QLD
- CCSenior Project ManagerVIC
- CCProject CoordinatorACT
- CCSenior Enterprise Architect - eCommerceVIC
- FTSenior Enterprise Architect, Financial ServicesAsia
- CCNV1 | System admin with SQL server experience for Defence Application SupportACT
- FTBusiness Intelligence ConsultantSA
- FTPMO AnalystNSW
- FTSolution ArchitectVIC
- CCChange Manager x 2NSW
- FTApplication Team Lead | Billing & CreditVIC
- FTProject Manager | Permanent role in Canberra | NV1/2 clearedACT
- CCFront end and Full Stack DevelopersNSW
- CCHealthcare Test SpecialistSA
- FTSenior Middleware Lead Shared Services (Support and EngineeringVIC
- FTChange Lead- DigitalVIC
- CCRemedy AdministratorNSW
- CCCommunication and Change ManagerVIC
- FTBA/Technical Project Manager/Product ManagerQLD
- CCDesktop Engineer, renewable contractAsia
- CCFront End DeveloperWA
- CCSr. Business Analyst - ServicePLUSVIC
- FTSenior Network Engineer - Australian Systems Integrator - Immediate interviewNSW
- CCJava Developer (front end)WA