Monstrous. Brawny. Or in the parlance of our times: OP for "overpowered." All are apt terms for Intel’s new 10-core Core i7-6950X, a muscular CPU so over-the-top in power, that you’d have to be crazy to need one.
But Intel’s Extreme Edition CPUs have never been about catering to practical need. No, they cater to your desire for raw performance.This time, though, Intel is pushing both performance and your wallet to the very edge with a CPU priced at $1,723.
No, that’s not a typo: $1,723. For just one CPU.
To find out if Intel’s brutishly powerful chip is worth it, read on.
No surprises here
Broadwell-E has probably been one of the worst-kept secrets in the industry. Models and specs leaks have been floating around for months. All those rumors are merely that until we get it from the horse’s mouth, and Mr. Ed has finally spoken. Here are full details on the Broadwell-E product line, including the current two Skylake “K” chips (outside the red box.)
The Broadwell-E family essentially replaces the three Haswell-E family chips, which were introduced two years ago with the LGA2011-V3 platform. Except for the new 10-core Broadwell-E, which creates a new uber-chip tier above the others, the rest fall in line with the older Haswell-E chips they replace. See the details below from the original rollout of Haswell-E with the pair of smaller Haswell “K” CPUs (outside the red box).
Besides the new cores, you also get a price increase--a perk of having basically no competition. Intel continues to offer a ”budget” Broadwell-E, which has six cores and fewer PCIe lanes available in the chip. That decision isn’t technical, it’s marketing. If you want to build or buy a PC with 40 PCIe Gen 3 lanes turned on, you have to pay the extra price.
An easy upgrade
On the outside, the new Broadwell-E's heat spreader gets a more angule design that increases its strength for the more fragile 14nm chip inside. Like Haswell-E, it uses solder interface material rather than thermal paste.
Broadwell-E was always intended as a drop-in replacement for Haswell-E so for the most part (more on this later) there’s no surprises. Just update your BIOS and socket in the chip and you’re ready to rocket. The new chip also supports DDR4/2400 officially, which Haswell-E did not (though it did just fine with that memory anyway.
The actual microarchitecture inside shouldn’t surprise, either. It’s built on a 14nm process using the Broadwell (5th-gen) cores that have been in laptops since 2015 (late 2014, if you count Core M). Broadwell actually made a very late appearance in desktops in the unwanted Core i7-5775C (which I reviewed) in 2015 before quickly sinking into obscurity when the 6th-gen Skylake CPUs showed up days later.
Here’s a shot of the die. As you can see, it’s a native 10-core chip on the highest-end Broadwell-E part. Intel doesn’t pull any funny business by using a chip with 12 cores and turning off two. The 8-core and two 6-core models use the same 10-core chip, with cores permanently switched off.
Turbo Boost Max Technology 3.0
Among the most notable changes to Broadwell-E is the new Turbo Boost Max Technology 3.0 feature.
Turbo Boost was introduced with the first Core i7 chips in 2008. Like the name says, it temporarily increases the clock speed of the chip to improve performance.
Turbo Boost Max 3.0, exclusive to the Broadwell-E, is quite different. Intel said it identifies at the factory which CPU core is the “best” and runs it at a higher clock speed than the others.
Turbo Boost Max 3.0 can then bind single-threaded applications to that one higher-flying core, for a performance boost of up to 15 percent.
Turbo Boost Max 3.0 can boost apps in the foreground, and it lets you assign a particular app to a particular core or cores.
In Windows, you’ve been able to bind a certain program or process to a particular core or thread by changing the affinity. Turbo Boost Max 3.0 does it for you automatically (once set up).
Per-core overclocking and more
Broadwell-E has a few features catering specifically to the overclocking sports—nerds who push CPU clock speeds to multi-gigahertz levels using liquid nitrogen and other exotic cooling methods in competition. One feature, for instance, lets you crank back the AVX ratio to lower the power it consumes during benchmark runs.
Not everyone is into extreme overclocking sports, though. Many just want to tune a CPU to its highest actual usable performance. For them, Intel has added per-core overclocking. With older CPUs, overclocks were somewhat granular in that you could pick higher frequencies based on whether it was using, say, two cores. The cores picked, though, were random. With Broadwell-E you can overclock a specific core and even change its individual voltage.
When combined with Turbo Boost Max 3.0, you could, say, set an application to run on that particular overclocked core too. That pays real dividends in performance for someone willing to put in the tuning time.
Lots of cores, lower clock speeds
It's no coincidence that so many of Broadwell-E's innovations are aimed at giving the chip better performance in single-threaded or lightly-threaded tasks. That’s because Intel knows applications that can take full advantage of the resources of a 10-core chip, or even an 8-core chip, are rare as an Ortolan’s teeth.
That inconvenient truth has always put the company’s big chips at a distinct disadvantage to the smaller quad-cores such as Intel’s Core i7-6700K. With fewer cores and lower thermal overhead, those quad-cores can easily run at higher clock speeds. For example, the same Core i7-6700K has a base clock speed of 4GHz, while the top-end 10-core Broadwell-E has a base clock of 3GHz. All the tweaks Intel has put into Broadwell-E, the company said, should put it on far better footing with a nimbler quad-core, while giving it the capability to blow the doors off when the load needs more than four cores.
Read on for our performance benchmarks and how we tested